|
|
|
|
 |
Volume 11, Issue 4 (Autumn 2023) |
 |
|
|
|
|
The Application of 3D Bioprinting Technology in the Treatment of Spinal Cord Lesions
|
Arash Abdolmaleki   , Leila Taghizadeh Momen , Asadollah Asadi * , Shukur Wasman Smail |
| Department of Biology, Faculty of Science, University of Mohaghegh Ardabili, Ardabil, Iran , asad.asady@gmail.com |
|
|
Abstract: (1083 Views) |
Introduction: Spinal cord injury is a disease related to the central nervous system that leads to impaired sensory and motor functions, loss of axon, cell body and glial cell support. Currently, the treatment of spinal injuries is limited to physiotherapy, occupational therapy, and surgery. However, current treatment methods cannot fully and effectively regenerate damaged nerve fibers and improve nerve function. Neural tissue engineering has focused on building biomimetic scaffolds inspired by the complex structure of the spinal cord together with cells to repair spinal cord lesions. In recent years, the 3D bioprinting technique has been used to make highly specialized and complex biological models, such as the spinal cord. Bioprinting is done by placing bioink on a substrate in layers. The additive approach of bioprinting enables the construction of fine 3D tissue models with precise control over the spatial position of cells. Conclusion: The application of 3D bioprinting technology in the field of making cell-rich scaffolds and in vivo studies in spinal cord injury models indicate the bright prospects of this technology in the field of treating spinal lesions. However, to completely simulate the spinal cord tissue and improve the nerve function of the spinal cord after injury, it is necessary to conduct more research with different cells, biomaterials, and spinal cord injury models. In this review article, the method of 3D bioprinting, the types of printing techniques in spinal cord tissue engineering, and the studies conducted in line with the application of bioprinting in the treatment of spinal cord injuries are discussed.
|
|
| Keywords: Bioprinting, Spinal Cord Injuries, Tissue Engineering |
|
|
Full-Text [PDF 944 kb]
(377 Downloads)
|
|
Type of Study: Review --- Open Access, CC-BY-NC |
Subject:
Neural Repair
|
|
|
|
|
|
|
| References |
1. Maribo T, Jensen CM, Madsen LS, Handberg C. Experiences with and perspectives on goal setting in spinal cord injury rehabilitation: a systematic review of qualitative studies. Spinal Cord. 2020;58(9):949-58. [ DOI:10.1038/s41393-020-0485-8] 2. Luthra A, Prabhakar H. Chapter 10 - Postoperative Paraplegia and Quadriplegia. In: Prabhakar H, editor. Complications in Neuroanesthesia. San Diego: Academic Press; 2016. p. 77-87. [ DOI:10.1016/B978-0-12-804075-1.00010-9] 3. Soluki M, Mahmoudi F, Abdolmaleki A, Asadi A, Sabahi Namini A. Cerium oxide nanoparticles as a new neuroprotective agent to promote functional recovery in a rat model of sciatic nerve crush injury. Br J Neurosurg. 2020:1-6. [ DOI:10.1080/02688697.2020.1864292] 4. Alizadeh A, Dyck SM, Karimi-Abdolrezaee S. Traumatic Spinal Cord Injury: An Overview of Pathophysiology, Models and Acute Injury Mechanisms. Frontiers in Neurology. 2019;10. [ DOI:10.3389/fneur.2019.00282] 5. Liu Z, Yang Y, He L, Pang M, Luo C, Liu B, et al. High-dose methylprednisolone for acute traumatic spinal cord injury: A meta-analysis. Neurology. 2019;93(9):e841-e50. [ DOI:10.1212/WNL.0000000000007998] 6. Cheung V, Hoshide R, Bansal V, Kasper E, Chen CC. Methylprednisolone in the management of spinal cord injuries: Lessons from randomized, controlled trials. Surg Neurol Int. 2015;6:142. [ DOI:10.4103/2152-7806.163452] 7. Katoh H, Yokota K, Fehlings MG. Regeneration of spinal cord connectivity through stem cell transplantation and biomaterial scaffolds. Frontiers in cellular neuroscience. 2019;13:248. [ DOI:10.3389/fncel.2019.00248] 8. O'Shea TM, Burda JE, Sofroniew MV. Cell biology of spinal cord injury and repair. The Journal of clinical investigation. 2017;127(9):3259-70. [ DOI:10.1172/JCI90608] 9. Abdolmaleki A, Karimian A, Asadi A, A. Ghanimi H. 3D Bioprinting Applications as New Technology for Nerve Regeneration. Zahedan J Res Med Sci. 2023;25(2):e121121. [ DOI:10.5812/zjrms-121121] 10. Abdolmaleki A, Zahri S, Asadi A, Wassersug R. Role of Tissue Engineering and Regenerative Medicine in Treatment of Sport Injuries. Trauma Monthly. 2020;25(3):106-12. 11. Abdolmaleki A, Asadi A, Taghizadeh Momen L, Parsi Pilerood S. The Role of Neural Tissue Engineering in the Repair of Nerve Lesions. The Neuroscience Journal of Shefaye Khatam. 2020;8(3):80-96. [ DOI:10.29252/shefa.8.3.80] 12. Liu K, Yan L, Li R, Song Z, Ding J, Liu B, et al. 3D printed personalized nerve guide conduits for precision repair of peripheral nerve defects. Advanced Science. 2022;9(12):2103875. [ DOI:10.1002/advs.202103875] 13. Bedir T, Ulag S, Ustundag CB, Gunduz O. 3D bioprinting applications in neural tissue engineering for spinal cord injury repair. Materials Science and Engineering: C. 2020;110:110741. [ DOI:10.1016/j.msec.2020.110741] 14. Zhang B, Luo Y, Ma L, Gao L, Li Y, Xue Q, et al. 3D bioprinting: an emerging technology full of opportunities and challenges. Bio-Design and Manufacturing. 2018;1:2-13. [ DOI:10.1007/s42242-018-0004-3] 15. Murphy SV, De Coppi P, Atala A. Opportunities and challenges of translational 3D bioprinting. Nature biomedical engineering. 2020;4(4):370-80. [ DOI:10.1038/s41551-019-0471-7] 16. Koffler J, Zhu W, Qu X, Platoshyn O, Dulin JN, Brock J, et al. Biomimetic 3D-printed scaffolds for spinal cord injury repair. Nature medicine. 2019;25(2):263-9. [ DOI:10.1038/s41591-018-0296-z] 17. Yuan TY, Zhang J, Yu T, Wu JP, Liu QY. 3D Bioprinting for Spinal Cord Injury Repair. Front Bioeng Biotechnol. 2022;10:847344. [ DOI:10.3389/fbioe.2022.847344] 18. Johnson BN, Lancaster KZ, Hogue IB, Meng F, Kong YL, Enquist LW, et al. 3D printed nervous system on a chip. Lab Chip. 2016;16(8):1393-400. [ DOI:10.1039/C5LC01270H] 19. Ravnic DJ, Leberfinger AN, Koduru SV, Hospodiuk M, Moncal KK, Datta P, et al. Transplantation of bioprinted tissues and organs: Technical and clinical challenges and future perspectives. Annals of Surgery. 2017;266(1):48-58. [ DOI:10.1097/SLA.0000000000002141] 20. Vijayavenkataraman S, Yan W-C, Lu WF, Wang C-H, Fuh JYH. 3D bioprinting of tissues and organs for regenerative medicine. Advanced drug delivery reviews. 2018;132:296-332. [ DOI:10.1016/j.addr.2018.07.004] 21. Xie Z, Gao M, Lobo AO, Webster TJ. 3D bioprinting in tissue engineering for medical applications: the classic and the hybrid. Polymers. 2020;12(8):1717. [ DOI:10.3390/polym12081717] 22. Hockaday L, Kang K, Colangelo N, Cheung P, Duan B, Malone E, et al. Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds. Biofabrication. 2012;4(3):035005. [ DOI:10.1088/1758-5082/4/3/035005] 23. Vettori L, Sharma P, Rnjak-Kovacina J, Gentile C. 3D bioprinting of cardiovascular tissues for in vivo and in vitro applications using hybrid hydrogels containing silk fibroin: state of the art and challenges. Current Tissue Microenvironment Reports. 2020;1:261-76. [ DOI:10.1007/s43152-020-00026-5] 24. Seol Y-J, Kang H-W, Lee SJ, Atala A, Yoo JJ. Bioprinting technology and its applications. European Journal of Cardio-Thoracic Surgery. 2014;46(3):342-8. [ DOI:10.1093/ejcts/ezu148] 25. Ali M, PR AK, Lee SJ, Jackson JD. Three-dimensional bioprinting for organ bioengineering: promise and pitfalls. Current opinion in organ transplantation. 2018;23(6):649-56. [ DOI:10.1097/MOT.0000000000000581] 26. Tan B, Gan S, Wang X, Liu W, Li X. Applications of 3D bioprinting in tissue engineering: Advantages, deficiencies, improvements, and future perspectives. Journal of Materials Chemistry B. 2021;9(27):5385-413. [ DOI:10.1039/D1TB00172H] 27. Agarwal S, Saha S, Balla VK, Pal A, Barui A, Bodhak S. Current developments in 3D bioprinting for tissue and organ regeneration-a review. Frontiers in Mechanical Engineering. 2020;6:589171. [ DOI:10.3389/fmech.2020.589171] 28. Irvine SA, Venkatraman SS. Bioprinting and differentiation of stem cells. Molecules. 2016;21(9):1188. [ DOI:10.3390/molecules21091188] 29. Matai I, Kaur G, Seyedsalehi A, McClinton A, Laurencin CT. Progress in 3D bioprinting technology for tissue/organ regenerative engineering. Biomaterials. 2020;226:119536. [ DOI:10.1016/j.biomaterials.2019.119536] 30. Gungor-Ozkerim PS, Inci I, Zhang YS, Khademhosseini A, Dokmeci MR. Bioinks for 3D bioprinting: an overview. Biomater Sci. 2018;6(5):915-46. [ DOI:10.1039/C7BM00765E] 31. Chen J, Huang D, Wang L, Hou J, Zhang H, Li Y, et al. 3D bioprinted multiscale composite scaffolds based on gelatin methacryloyl (GelMA)/chitosan microspheres as a modular bioink for enhancing 3D neurite outgrowth and elongation. Journal of colloid and interface science. 2020;574:162-73. [ DOI:10.1016/j.jcis.2020.04.040] 32. Zhang YS, Oklu R, Dokmeci MR, Khademhosseini A. Three-dimensional bioprinting strategies for tissue engineering. Cold Spring Harbor perspectives in medicine. 2018;8(2):a025718. [ DOI:10.1101/cshperspect.a025718] 33. Xing F, Xiang Z, Rommens PM, Ritz U. 3D bioprinting for vascularized tissue-engineered bone fabrication. Materials. 2020;13(10):2278. [ DOI:10.3390/ma13102278] 34. Ghayour MB, Abdolmaleki A, Fereidoni M. Use of stem cells in the regeneration of peripheral nerve injuries: an overview. The Neuroscience Journal of Shefaye Khatam. 2015;3(1):84-98. [ DOI:10.18869/acadpub.shefa.3.1.84] 35. Augustine R. Skin bioprinting: a novel approach for creating artificial skin from synthetic and natural building blocks. Progress in biomaterials. 2018;7(2):77-92. [ DOI:10.1007/s40204-018-0087-0] 36. Rosser J, Thomas DJ. Bioreactor processes for maturation of 3D bioprinted tissue. 3D Bioprinting for reconstructive surgery: Elsevier; 2018. p. 191-215. [ DOI:10.1016/B978-0-08-101103-4.00010-7] 37. Smith LJ, Li P, Holland MR, Ekser B. FABRICA: a bioreactor platform for printing, perfusing, observing, & stimulating 3D tissues. Scientific reports. 2018;8(1):7561. [ DOI:10.1038/s41598-018-25663-7] 38. Salehi-Nik N, Amoabediny G, Pouran B, Tabesh H, Shokrgozar MA, Haghighipour N, et al. Engineering parameters in bioreactor's design: a critical aspect in tissue engineering. BioMed research international. 2013;2013. [ DOI:10.1155/2013/762132] 39. Lima TdPL, Canelas CAdA, Concha VOC, Costa FAMd, Passos MF. 3D Bioprinting Technology and Hydrogels Used in the Process. Journal of Functional Biomaterials [Internet]. 2022; 13(4). [ DOI:10.3390/jfb13040214] 40. Mohan MK, Rahul AV, De Schutter G, Van Tittelboom K. Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review. Cement and Concrete Composites. 2021;115:103855. [ DOI:10.1016/j.cemconcomp.2020.103855] 41. Murphy SV, Atala A. 3D bioprinting of tissues and organs. Nature Biotechnology. 2014;32(8):773-85. [ DOI:10.1038/nbt.2958] 42. Truby RL, Lewis JA. Printing soft matter in three dimensions. Nature. 2016;540(7633):371-8. [ DOI:10.1038/nature21003] 43. Bishop ES, Mostafa S, Pakvasa M, Luu HH, Lee MJ, Wolf JM, et al. 3-D bioprinting technologies in tissue engineering and regenerative medicine: Current and future trends. Genes Dis. 201.95-185:(4)4;7 [ DOI:10.1016/j.gendis.2017.10.002] 44. Zhang X, Zhang Y. Tissue Engineering Applications of Three-Dimensional Bioprinting. Cell Biochem Biophys. 2015;72(3):777-82. [ DOI:10.1007/s12013-015-0531-x] 45. Iwanaga S, Arai K, Nakamura M. Chapter 4 - Inkjet Bioprinting. In: Atala A, Yoo JJ, editors. Essentials of 3D Biofabrication and Translation. Boston: Academic Press; 2015. p. 61-79. [ DOI:10.1016/B978-0-12-800972-7.00004-9] 46. Hölzl K, Lin S, Tytgat L, Van Vlierberghe S, Gu L, Ovsianikov A. Bioink properties before, during and after 3D bioprinting. Biofabrication. 2016;8(3):032002. [ DOI:10.1088/1758-5090/8/3/032002] 47. O'Brien CM, Holmes B, Faucett S, Zhang LG. Three-dimensional printing of nanomaterial scaffolds for complex tissue regeneration. Tissue Eng Part B Rev. 2015;21(1):103-14. [ DOI:10.1089/ten.teb.2014.0168] 48. Rider P, Kačarević Ž P, Alkildani S, Retnasingh S, Barbeck M. Bioprinting of tissue engineering scaffolds. J Tissue Eng. 2018;9:2041731418802090. [ DOI:10.1177/2041731418802090] 49. Li X, Liu B, Pei B, Chen J, Zhou D, Peng J, et al. Inkjet Bioprinting of Biomaterials. Chemical Reviews. 2020;120(19):10793-833. [ DOI:10.1021/acs.chemrev.0c00008] 50. Yuan T-Y, Zhang J, Yu T, Wu J-P, Liu Q-Y. 3D Bioprinting for Spinal Cord Injury Repair. Frontiers in Bioengineering and Biotechnology. 2022;10. [ DOI:10.3389/fbioe.2022.847344] 51. Knowlton S, Yenilmez B, Anand S, Tasoglu S. Photocrosslinking-based bioprinting: Examining crosslinking schemes. Bioprinting. 2017;5:10-8. [ DOI:10.1016/j.bprint.2017.03.001] 52. Melchels FP, Feijen J, Grijpma DW. A review on stereolithography and its applications in biomedical engineering. Biomaterials. 2010;31(24):6121-30. [ DOI:10.1016/j.biomaterials.2010.04.050] 53. Edgar JM, Robinson M, Willerth SM. Fibrin hydrogels induce mixed dorsal/ventral spinal neuron identities during differentiation of human induced pluripotent stem cells. Acta Biomater. 2017;51:237-45. [ DOI:10.1016/j.actbio.2017.01.040] 54. Sakai S, Kamei H, Mori T, Hotta T, Ohi H, Nakahata M, et al. Visible Light-Induced Hydrogelation of an Alginate Derivative and Application to Stereolithographic Bioprinting Using a Visible Light Projector and Acid Red. Biomacromolecules. 2018;19(2):672-9. [ DOI:10.1021/acs.biomac.7b01827] 55. Derakhshanfar S, Mbeleck R, Xu K, Zhang X, Zhong W, Xing M. 3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances. Bioact Mater. 201.56-144:(2)3;8 [ DOI:10.1016/j.bioactmat.2017.11.008] 56. Zhang J, Hu Q, Wang S, Tao J, Gou M. Digital light processing based three-dimensional printing for medical applications. International journal of bioprinting. 2020;6(1). [ DOI:10.18063/ijb.v6i1.242] 57. Yu C, Ma X, Zhu W, Wang P, Miller KL, Stupin J, et al. Scanningless and continuous 3D bioprinting of human tissues with decellularized extracellular matrix. Biomaterials. 2019;194:1-13. [ DOI:10.1016/j.biomaterials.2018.12.009] 58. Kim SH, Yeon YK, Lee JM, Chao JR, Lee YJ, Seo YB, et al. Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing. Nature communications. 2018;9(1):1620. [ DOI:10.1038/s41467-018-03759-y] 59. Mohamed OA, Masood SH, Bhowmik JL. Optimization of fused deposition modeling process parameters: a review of current research and future prospects. Advances in Manufacturing. 2015;3.53-42:(1) [ DOI:10.1007/s40436-014-0097-7] 60. Chohan JS, Singh R, Boparai KS, Penna R, Fraternali F. Dimensional accuracy analysis of coupled fused deposition modeling and vapour smoothing operations for biomedical applications. Composites Part B: Engineering. 2017;117:138-49. [ DOI:10.1016/j.compositesb.2017.02.045] 61. Do AV, Khorsand B, Geary SM, Salem AK. 3D Printing of Scaffolds for Tissue Regeneration Applications. Adv Healthc Mater. 2015;4(12):1742-62. [ DOI:10.1002/adhm.201500168] 62. Rajaram A, Schreyer D, Chen D. Bioplotting alginate/hyaluronic acid hydrogel scaffolds with structural integrity and preserved schwann cell viability. 3D Printing and Additive Manufacturing. 2014;1(4):194-203. [ DOI:10.1089/3dp.2014.0006] 63. Joung D, Lavoie NS, Guo SZ, Park SH, Parr AM, McAlpine MC. 3D printed neural regeneration devices. Advanced functional materials. 2020;30(1):1906237. [ DOI:10.1002/adfm.201906237] 64. Szymoniuk M, Mazurek M, Dryla A, Kamieniak P. The application of 3D-bioprinted scaffolds for neuronal regeneration after traumatic spinal cord injury - A systematic review of preclinical in vivo studies. Exp Neurol. 2023;363:114366. [ DOI:10.1016/j.expneurol.2023.114366] 65. Koffler J, Zhu W, Qu X, Platoshyn O, Dulin JN, Brock J, et al. Biomimetic 3D-printed scaffolds for spinal cord injury repair. Nat Med. 2019;25(2):263-9. [ DOI:10.1038/s41591-018-0296-z] 66. Sarig-Nadir O, Livnat N, Zajdman R, Shoham S, Seliktar D. Laser photoablation of guidance microchannels into hydrogels directs cell growth in three dimensions. Biophys J. 2009;96(11):4743-52. [ DOI:10.1016/j.bpj.2009.03.019] 67. Liu X, Hao M, Chen Z, Zhang T, Huang J, Dai J, et al. 3D bioprinted neural tissue constructs for spinal cord injury repair. Biomaterials. 2021;272:120771. [ DOI:10.1016/j.biomaterials.2021.120771] 68. Chen C, Zhao Ml, Zhang Rk, Lu G, Zhao Cy, Fu F, et al. Collagen/heparin sulfate scaffolds fabricated by a 3D bioprinter improved mechanical properties and neurological function after spinal cord injury in rats. Journal of Biomedical Materials Research Part A. 2017;105(5):1.32-324 [ DOI:10.1002/jbm.a.36011] 69. Jiang J-P, Liu X-Y, Zhao F, Zhu X, Li X-Y, Niu X-G, et al. Three-dimensional bioprinting collagen/silk fibroin scaffold combined with neural stem cells promotes nerve regeneration after spinal cord injury. Neural regeneration research. 2020;15.959:(5) [ DOI:10.4103/1673-5374.268974] 70. Li Y, Cao X, Deng W, Yu Q, Sun C, Ma P, et al. 3D printable Sodium alginate-Matrigel (SA-MA) hydrogel facilitated ectomesenchymal stem cells (EMSCs) neuron differentiation. Journal of Biomaterials Applications. 2021;35(6):709-19. [ DOI:10.1177/0885328220961261] 71. Wong DY, Leveque JC, Brumblay H, Krebsbach PH, Hollister SJ, Lamarca F. Macro-architectures in spinal cord scaffold implants influence regeneration. J Neurotrauma. 2008;25(8):1027-37. [ DOI:10.1089/neu.2007.0473] 72. Joung D, Truong V, Neitzke CC, Guo SZ, Walsh PJ, Monat JR, et al. 3D printed stem‐cell derived neural progenitors generate spinal cord scaffolds. Advanced functional materials. 2018;28(39):1801850. [ DOI:10.1002/adfm.201801850] 73. Sun Y, Yang C, Zhu X, Wang JJ, Liu XY, Yang XP, et al. 3D printing collagen/chitosan scaffold ameliorated axon regeneration and neurological recovery after spinal cord injury. Journal of Biomedical Materials Research Part A. 2019;107(9):1898-908. [ DOI:10.1002/jbm.a.36675] 74. Veeravalli RS, Vejandla B, Savani S, Nelluri A, Peddi NC. Three-Dimensional Bioprinting in Medicine: A Comprehensive Overview of Current Progress and Challenges Faced. Cureus. 2023;15.(7) [ DOI:10.7759/cureus.41624] 75. Reddy VS, Ramasubramanian B, Telrandhe VM, Ramakrishna S. Contemporary standpoint and future of 3D bioprinting in tissue/organs printing. Current Opinion in Biomedical Engineering. 2023;27:100461. [ DOI:10.1016/j.cobme.2023.100461] 76. Rizzo ML, Turco S, Spina F, Costantino A, Visi G, Baronti A, et al. 3D printing and 3D bioprinting technology in medicine: ethical and legal issues. Clin Ter. 2023;174(1):80-4. 77. Gungor-Ozkerim PS, Inci I, Zhang YS, Khademhosseini A, Dokmeci MR. Bioinks for 3D bioprinting: an overview. Biomaterials science. 2018;6(5):915-46. [ DOI:10.1039/C7BM00765E] 78. Jovic TH, Combellack EJ, Jessop ZM, Whitaker IS. 3D Bioprinting and the Future of Surgery. Frontiers in Surgery. 2020;7. [ DOI:10.3389/fsurg.2020.609836] 79. Bishop ES, Mostafa S, Pakvasa M, Luu HH, Lee MJ, Wolf JM, et al. 3-D bioprinting technologies in tissue engineering and regenerative medicine: Current and future trends. Genes & Diseases. 2017;4(4):185-95. [ DOI:10.1016/j.gendis.2017.10.002] 80. Kačarević ŽP, Rider PM, Alkildani S, Retnasingh S, Smeets R, Jung O, et al. An introduction to 3D bioprinting: possibilities, challenges and future aspects. Materials. 2018;11(11):2199. [ DOI:10.3390/ma11112199] 81. Datta P, Cabrera LY, Ozbolat IT. Ethical challenges with 3D bioprinted tissues and organs. Trends Biotechnol. 2023;41(1):6-9. [ DOI:10.1016/j.tibtech.2022.08.012] 82. Mao H, Yang L, Zhu H, Wu L, Ji P, Yang J, et al. Recent advances and challenges in materials for 3D bioprinting. Progress in Natural Science: Materials International. 2020;30(5):618-34. [ DOI:10.1016/j.pnsc.2020.09.015] 83. Lu D, Yang Y, Zhang P, Ma Z, Li W, Song Y, et al. Development and Application of Three-Dimensional Bioprinting Scaffold in the Repair of Spinal Cord Injury. Tissue Engineering and Regenerative Medicine. 2022;19(6):1113-27. [ DOI:10.1007/s13770-022-00465-1] 84. Song J, Lv B, Chen W, Ding P, He Y. Advances in 3D printing scaffolds for peripheral nerve and spinal cord injury repair. International Journal of Extreme Manufacturing. 2023. [ DOI:10.1088/2631-7990/acde21] 85. Xia QQ, Yuan H, Wang TH, Xiong LL, Xin ZJ. Application and progress of three‐dimensional bioprinting in spinal cord injury. Ibrain. 2021;7(4):325-36. [ DOI:10.1002/ibra.12005] 86. Yuan T-Y, Zhang J, Yu T, Wu J-P, Liu Q-Y3.D bioprinting for spinal cord injury repair. Frontiers in Bioengineering and Biotechnology. 2022;10:847344. [ DOI:10.3389/fbioe.2022.847344] 87. Lu D, Yang Y, Zhang P, Ma Z, Li W, Song Y, et al. Development and Application of Three-Dimensional Bioprinting Scaffold in the Repair of Spinal Cord Injury. Tissue Engineering and Regenerative Medicine. 2022;19(6):1113-27. [ DOI:10.1007/s13770-022-00465-1] 88. Amukarimi S, Mozafari M. 4D bioprinting of tissues and organs. Bioprinting. 2021;23:e00161. [ DOI:10.1016/j.bprint.2021.e00161] |
|
Abdolmaleki A, Taghizadeh Momen L, Asadi A, Wasman Smail S. The Application of 3D Bioprinting Technology in the Treatment of Spinal Cord Lesions. Shefaye Khatam 2023; 11 (4) :79-93 URL: http://shefayekhatam.ir/article-1-2428-en.html
|
|
|
|
|
|
|
